-
What should I pay attention to when using baking motors?
During the drying process, the baking temperature should be controlled at any time. The baking temperature is generally maintained at around 80°C, and the baking time is generally maintained at 8 to 1
2025-05-28 WEG Motor 375
-
How to Wind Electric Motor Windings
Before winding the motor winding, you must know the number of pole-phase groups of the motor winding to be wound. The windings of each pole-phase group should be wound continuously as much as possib
2025-05-28 WEG Motor 562
-
Steps to remove the old winding of the motor
When removing the old winding of the motor, first soften or burn the insulating paint (in order to ensure the quality of the motor, it is best not to heat the motor stator in the fire); when removing
2025-05-28 WEG Motor 338
-
Causes of short circuit failure in motor windings
The reasons for short circuit failure of motor windings are: The motor current is too large; The power supply voltage is too high; Mechanical damage; Insulation is damaged when re-inserting the wire;
2025-05-28 WEG Motor 183
-
Common causes of motor stator winding failure
The stator winding is the main component of the motor and is also the main part of the motor that is most prone to failure.Common reasons for motor stator winding failure are:After long-term operation
2025-05-28 WEG Motor 200
-
Precautions for motor installation
When moving the motor, do not use a rope to put on the shaft or collector ring or commutator to move it, and do not lift the motor through the end cover hole of the motor.When installing the motor, mo
2025-05-28 WEG Motor 181
-
Common faults of motor core
Common faults of motor cores include:Short circuit between silicon steel sheets caused by insulation damage;Loose core caused by poor tightening and motor vibration;Improper operation when removing th
2025-05-28 WEG Motor 188
-
Motor bearing lubrication
Notes on bearing lubrication:Most small motors have adopted double-sealed bearings (with "ZZ" after the bearing model), which are pre-oiled and do not need to be re-oiled.Motors with oil fil
2025-05-28 297
